Calls Today
0
since 00:00
RX Frequency
462.550
MHz · P25
TX Frequency
467.550
MHz · P25
Last BER
0.0%
bit error rate
RSSI
-87
dBm · last RX
Uptime
0d 0h
since boot
Active Call MONITORING
P25 VOICE CHANNEL  ● LIVE
Source ID
—
Talkgroup
—
Duration
—
NAC
0x293
Encrypted
Partial
IMBE Frames
—
Call Log 0 entries
Time Source Talkgroup Type Duration BER RSSI
AWAITING CALLS…
Repeater Info
CALLSIGNSWLA-TAC
LOCATIONLake Charles, LA
ProtocolP25 Phase I
NAC0x293
WACN
0xBEE00
SYSID0x001
MMDVM Ver20231007
ModemJumbospot RPi
TX Power5 W
AntennaDB224 @ 15ft
Talkgroups P25 TGs
4633 LC RPT Tac CLEAR
4648 Local TAC ADP
232187 P25-DMR CLEAR
10 PARRAT CLEAR
90364 PRV-CALL ADP
About What Is MMDVM?
📡

Multi-Mode Digital Voice Modem

MMDVM (Multi-Mode Digital Voice Modem) is open-source firmware for a hardware modem that enables a single device to operate as a digital voice repeater supporting multiple protocols — DMR, D-Star, YSF, P25, NXDN, and more — simultaneously or selectively.

🔷

P25 (Project 25)

P25 is a suite of standards for digital radio communications developed for North American public safety. It provides interoperability between agencies and manufacturers. Phase I uses FDMA (12.5 kHz channels); Phase II uses TDMA (2 slots per 12.5 kHz channel), doubling spectral efficiency.

🔁

Network Linking

MMDVM repeaters connect to digital networks via software like MMDVMHost, linking to P25 reflectors, TGIF, Brandmeister (DMR), and others. This allows a locally-transmitted signal to be routed globally, and remote audio to be re-broadcast over the local RF output.

🛠️

Hardware

Common MMDVM hardware includes the ZUMspot, MMDVM_HS_Hat, NanoDMR, and STM32-DVM boards. Most pair with a Raspberry Pi running MMDVMHost. The modem handles modulation/demodulation while the host software manages network connections and call routing.

Reference P25 Technical Specs
StandardTIA-102 (Project 25)
Voice CodecIMBE (Phase I) / AMBE+2 (Phase II)
ModulationC4FM / CQPSK (Phase I) · HDQPSK (Phase II)
Channel Width12.5 kHz (Phase I) · 6.25 kHz equiv. (Phase II)
Access MethodFDMA (Phase I) · TDMA (Phase II, 2 slots)
NACNetwork Access Code — 12-bit hex identifier (0x000–0xFFF)
WACNWide Area Communication Network ID (20-bit)
SYSIDSystem ID (12-bit) unique per network
Talkgroup16-bit address (0–65535) for group calls
EncryptionDES-OFB, AES-256 (optional, link-layer)
Freq BandsVHF, *UHF*, 700 MHz, 800 MHz, 900 MHz